Setup Explanation
The mop handle was needed only as an only supported beam and positioned crossways from two chairs. Each end of the beam battledbalanced on a bathroom scale so the reaction force at each help might be measured. A blue mop bucketfulbucket full of water was postponed from the beam using rope. The load was applied slowly to reduce shock loading.
Steps Taken to Cut down with errorDown Error
The preparation was to connect wisely to lessen undesirable and false readings. The beam was sited centrally on each scale display place. The cable position was obvious at each test place. The bucket was confirmed to make sure it was hanging freely and not hitting the ground. The load was functional gradually, and the digital scale was read fast before the auto off function started.
No basic disaster of the timber beam happened. Yet, at position 3, scale B logged 0.0 kg. This directs that the beam did not make contact with that support. This was a setup/equilibrium bethat was slightly less unsuccessful slightly than a material disaster.