Dear Mr. Akel,

ReferPlease refer to the below mail and attached file, please. Please note that the reading issue for the metering panel until now is not solved, - which is related to the transducers which isare installed in the S/S 9030, and connected to CT & VT for DIA C01 need- and needs to be calibrated/replacecalibrated/replaced due to an error in the readings
( above 120 MW.) andAnd it is not showing the reading (below 120 MW) in Riyadh ECC. Finally, after rectifying the reading issue for the metering panel, all the related signals to be tested and verifyverified with ECC.