Dear Sir,
As discussed, here is the detail of WTG’s that remains under Wwarning, due to different faults,. iIt includes WTG#02, WTG#24 and WTG#15. These WTG’s were monitored by SWPCL OPS for the last three months. Sometime WTG’s status is normal, because of hard reset and reactive again within 24 hours.
WTG#02
EVENT-ID: 294
Description:
Occurs if there is an error detected in one of the four advanced control sensors (Main shaft flange proximity sensors).
The text above was approved for publishing by the original author.
받은편지함으로 가서 저희가 보낸 확인 링크를 눌러서 교정본을 받으세요. 더 많은 이메일을 교정받고 싶으시면:
또는